View 74F269_4624753.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

74F269
8-bit bidirectional binary counter
Rev. 05 -- 25 March 2010 Product data sheet
1. General description
The 74F269 is a fully synchronous 8-stage up/down counter featuring a preset capability for programmable operation, carry look-ahead for easy cascading and a U/D input to control the direction of counting. All state changes, whether in counting or parallel loading, are initiated by the rising edge of the clock.
2. Features and benefits
Synchronous counting and loading Built-in look-ahead carry capability Count frequency 115 MHz (typical) Supply current 95 mA (typical)
3. Ordering information
Table 1. Ordering information Package Temperature range N74F269D N74F269DB 0 C to 70 C 0 C to 70 C Name SO24 SSOP24 Description plastic small outline package; 24 leads; body width 7.5 mm plastic shrink small outline package; 24 leads; body width 5.3 mm Version SOT137-1 SOT340-1 Type number
NXP Semiconductors
74F269
8-bit bidirectional binary counter
4. Functional diagram
24
CTR DIV256 M1 [LOAD] M2 [COUNT] M3 [UP] M4 [DOWN] 14
1
23 D0 24 1 11 12 13 PE U/D CP CEP CET
22 D1
21 D2
20 D3
18 D4
17 D5
16 D6
15 D7
12 13 11
G5 G6
3, 5, 6 CT = 256 4, 5, 8 CT = 0
2, 3, 5, 6+/C7 2, 3, 5, 6-
TC
14
23 22 21 20 1,7D [1] [2] [4] [8] [16] [32] [64] [128] 2 3 4 5 6 8 9 10
001aai980
Q0 Q1 Q2 Q3 Q4 Q5 Q6 Q7 2 3 4 5 6 8 9 10
001aai979
18 17 16 15
Fig 1.
Logic symbol
Fig 2.
IEC logic symbol
74F269_5
All information provided in this document is subject to legal disclaimers.
(c) NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 05 -- 25 March 2010
2 of 19
NXP Semiconductors
74F269
8-bit bidirectional binary counter
2 D0 23 DETAIL A
Q0
3 D1 22 DETAIL A
Q1
4 D2 21 DETAIL A
Q2
5 D3 20 DETAIL A
Q3
6 D4 18 DETAIL A
Q4
8 D5 17 DETAIL A
Q5
9 D6 16 DETAIL A
Q6
10 D7 15 DETAIL A
Q7
PE CP U/D
24 11 1
CEP CET
12 13
TOGGLE DETAIL A D Q
14
TC
Dn
CP Q
PE
CP
001aal296
Fig 3.
Logic diagram
74F269_5
All information provided in this document is subject to legal disclaimers.
(c) NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 05 -- 25 March 2010
3 of 19
xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxx x x x xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx xx xx xxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxx xxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxx x x xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxx xxx
Product data sheet Rev. 05 -- 25 March 2010 4 of 19
74F269_5
NXP Semiconductors
CP U/D PE D0 D1 D2 D3 D4 D5 D6 D7 PE U/D CP CEP CET Q0 Q1 Q2 Q3 Q4 Q5 Q6 Q7 TC D0 D1 D2 D3 D4 D5 D6 D7 PE U/D CP CEP CET Q0 Q1 Q2 Q3 Q4 Q5 Q6 Q7 TC D0 D1 D2 D3 D4 D5 D6 D7 PE U/D CP CEP CET Q0 Q1 Q2 Q3 Q4 Q5 Q6 Q7 TC D0 D1 D2 D3 D4 D5 D6 D7 PE U/D CP CEP CET Q0 Q1 Q2 Q3 Q4 Q5 Q6 Q7 TC
All information provided in this document is subject to legal disclaimers. (c) NXP B.V. 2010. All rights reserved.
least significant 8-bit counter
most significant 8-bit counter
001aal295
8-bit bidirectional binary counter
74F269
Fig 4.
Synchronous multistage counting scheme
NXP Semiconductors
74F269
8-bit bidirectional binary counter
5. Pinning information
5.1 Pinning
74F269
U/D Q0 Q1 Q2 Q3 Q4 GND Q5 Q6 1 2 3 4 5 6 7 8 9 24 PE 23 D0 22 D1 21 D2 20 D3 19 VCC 18 D4 17 D5 16 D6 15 D7 14 TC 13 CET
001aai981
Q7 10 CP 11 CEP 12
Fig 5.
Pin configuration SO24 and SSOP24 package
5.2 Pin description
Table 2. Symbol U/D GND CP CEP CET TC D0 to D7 VCC PE
[1]
Pin description Pin 1 7 11 12 13 14 23, 22, 21, 20, 18, 17, 16, 15 19 24 Description up or down count control input data output ground (0 V) clock input count enable parallel input (active LOW) count enable trickle input (active LOW) terminal count output (active LOW) data input supply voltage parallel enable input (active LOW) Unit load HIGH/LOW 1.0/1.0 50/33 1.0/1.0 1.0/1.0 1.0/1.0 50/33 1.0/1.0 1.0/1.0 Load value[1] HIGH/LOW 20 A/0.6 mA 1.0 mA/20 mA 20 A/0.6 mA 20 A/0.6 mA 20 A/0.6 mA 1.0 mA/20 mA 20 A/0.6 mA 20 A/0.6 mA
Q0 to Q7 2, 3, 4, 5, 6, 8, 9, 10
One FAST Unit Load (UL) is defined as 20 A in HIGH state, 0.6 A in LOW state.
74F269_5
All information provided in this document is subject to legal disclaimers.
(c) NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 05 -- 25 March 2010
5 of 19
NXP Semiconductors
74F269
8-bit bidirectional binary counter
6. Functional description
6.1 Function table
Table 3. Function table[1] Input CP Parallel load (Dn to Qn) Count up (increment) Count down (decrement) Hold (do nothing)
[1] H = HIGH voltage level steady state h = HIGH voltage level one set-up time prior to the LOW-to-HIGH clock transition L = LOW voltage level steady state l = LOW voltage level one set-up time prior to the LOW-to-HIGH clock transition qn = Lower case letters indicate state of referenced output prior to the LOW-to-HIGH clock transition X = don't care = LOW-to-HIGH clock transition * = The TC is LOW when CET is LOW and the counter is at terminal count Terminal count up is with all Qn outputs HIGH and terminal count down is with all Qn outputs LOW.
Operating modes
Output U/D X X h I X X CEP X X I I h X CET X X I I I h PE I l h h h h Dn I h X X X X Qn L H count up count down qn qn TC * * * * * H
74F269_5
All information provided in this document is subject to legal disclaimers.
(c) NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 05 -- 25 March 2010
6 of 19
NXP Semiconductors
74F269
8-bit bidirectional binary counter
PE D0 D1 D2 D3 D4 D5 D6 D7 CP U/D CEP and CET Q0 Q1 Q2 Q3 Q4 Q5 Q7 Q7 TC SEQUENCE 253 LOAD 254 255 0 1 2 INHIBIT 2 1 0 255 254 253
001aal297
COUNT UP
COUNT DOWN
Fig 6.
Typical timing sequence
74F269_5
All information provided in this document is subject to legal disclaimers.
(c) NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 05 -- 25 March 2010
7 of 19
NXP Semiconductors
74F269
8-bit bidirectional binary counter
7. Limiting values
Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol VCC VI VO IIK IO Tamb Tstg
[1] [2]
Parameter supply voltage input voltage output voltage input clamping current output current ambient temperature storage temperature
Conditions
[1]
Min -0.5 -0.5 -0.5 -30 [2]
Max +7.0 +7.0 +5.5 +5 40 70 +150
Unit V V V mA mA C C
output in HIGH-state VI < 0 V output in LOW-state in free air
[1]
0 -65
The input and output voltage ratings may be exceeded if the input and output current ratings are observed. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150 C.
8. Recommended operating conditions
Table 5. Symbol VCC VIH VIL IIK IOH IOL Recommended operating conditions Parameter supply voltage HIGH-level input voltage LOW-level input voltage input clamping current HIGH-level output current LOW-level output current Conditions Min 4.5 2.0 -1 Typ 5.0 Max 5.5 0.8 -18 20 Unit V V V mA mA mA
74F269_5
All information provided in this document is subject to legal disclaimers.
(c) NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 05 -- 25 March 2010
8 of 19
NXP Semiconductors
74F269
8-bit bidirectional binary counter
9. Static characteristics
Table 6. Static characteristics Conditions Min VIK VOH input clamping voltage HIGH-level output voltage VCC = 4.5 V; IIK = -18 mA VCC = 4.5 V; VI = VIL or VIH VCC = 10 %; IOH = -1 mA VCC = 5 %; IOH = -1 mA VOL LOW-level output voltage VCC = 4.5 V; IOL = 20 mA; VI = VIL or VIH VCC = 10 % VCC = 5 % II IIH IIL IO ICC input leakage current LOW-level input current output current supply current VCC = 5.5 V; VI = 7.0 V VCC = 5.5 V; VI = 0.5 V VCC = 5.5 V PE = CET = CEP = U/D = GND; VCC = 5.5 V; CP = rising edge Dn: VI = 4.5 V Dn: VI = GND
[1] [2] All typical values are measured at VCC = 5 V. Not more than one output should be tested at a time, and the duration of the test should not exceed one second.
[2]
Symbol Parameter
25 C Typ[1] -0.73 3.4 Max -1.2 -
-40 C to +85 C Unit Min -1.2 2.5 2.7 Max V V V
-
0.30 0.30 -
-
-60
0.50 0.50 100 20 -0.6 -150
V V A A mA mA
HIGH-level input current VCC = 5.5 V; VI = 2.7 V
-
93 98
-
-
120 125
mA mA
10. Dynamic characteristics
Table 7. Dynamic characteristics GND = 0 V; for test circuit, see Figure 13. Symbol Parameter Conditions 25 C; VCC = 5.0 V Min tPLH LOW to HIGH CP to Qn; load; PE = LOW; see Figure 7 propagation delay CP to Qn; count; PE = HIGH; see Figure 7 CP to TC; see Figure 7 CET to TC; see Figure 8 U/D to TC; see Figure 9 tPHL HIGH to LOW CP to Qn; load; PE = LOW; see Figure 7 propagation delay CP to Qn; count; PE = HIGH; see Figure 7 CP to TC; see Figure 7 CET to TC; see Figure 8 U/D to TC; see Figure 9 3.0 3.0 4.5 3.5 4.5 4.0 4.5 5.0 3.0 4.5 Typ 6.0 6.0 6.5 6.0 7.0 6.5 7.0 6.5 6.5 7.0 Max 8.5 9.0 9.5 9.0 9.0 8.5 10.0 9.5 9.0 9.5 0 C to 70 C; Unit VCC = 5.0 V 0.5 V Min 3.0 3.0 4.0 3.0 4.0 4.0 4.0 5.0 3.0 4.0 Max 9.0 10.0 10.5 10.0 10.0 9.0 10.5 10.0 10.0 10.0 ns ns ns ns ns ns ns ns ns ns
74F269_5
All information provided in this document is subject to legal disclaimers.
(c) NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 05 -- 25 March 2010
9 of 19
NXP Semiconductors
74F269
8-bit bidirectional binary counter
Table 7. Dynamic characteristics ...continued GND = 0 V; for test circuit, see Figure 13. Symbol Parameter Conditions 25 C; VCC = 5.0 V Min tsu(H) set-up time HIGH Dn to CP; see Figure 10 PE to CP; see Figure 10 CEP or CET to CP; see Figure 11 U/D to CP; see Figure 12 tsu(L) set-up time LOW Dn to CP; see Figure 10 PE to CP; see Figure 10 CEP or CET to CP; see Figure 11 U/D to CP; see Figure 12 th(H) hold time HIGH Dn to CP; see Figure 10 PE to CP; see Figure 10 CEP or CET to CP; see Figure 11 U/D to CP; see Figure 12 th(L) hold time LOW Dn to CP; see Figure 10 PE to CP; see Figure 10 CEP or CET to CP; see Figure 11 U/D to CP; see Figure 12 tWH tWL fmax pulse width HIGH pulse width LOW maximum frequency CP; see Figure 7 CP; see Figure 7 see Figure 7 3.5 5.5 6.0 8.0 3.5 6.5 8.0 6.5 1.0 0 0 0 1.0 0 0 0 4.0 4.5 100 Typ 115 Max 0 C to 70 C; Unit VCC = 5.0 V 0.5 V Min 2.5 5.5 5.0 6.5 2.5 6.5 6.5 6.5 0 0 0 0 1.0 0 0 0 4.0 5.0 85 Max ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns MHz
11. Waveforms
1/fmax VI CP input GND tWH tPHL VOH Qn, TC output VOL VM
001aal292
VM
tWL tPLH
Measurement points are given in Table 8. VM = 1.5 V VOL and VOH are the typical output voltage levels that occur with the output load.
Fig 7.
Clock (CP) to outputs (Qn, TC) propagation delay, the clock pulse width
74F269_5
All information provided in this document is subject to legal disclaimers.
(c) NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 05 -- 25 March 2010
10 of 19
NXP Semiconductors
74F269
8-bit bidirectional binary counter
VI CET GND tPHL VOH TC VOL
001aaa652
VM
tPLH VI
VM
Measurement points are given in Table 8. VM = 1.5 V VOL and VOH are the typical output voltage levels that occur with the output load.
Fig 8.
Input (CET) to output (TC) propagation delay
VI U/D GND tPHL VOH TC VOL
001aaa653
VM
tPLH VI
VM
Measurement points are given in Table 8. VM = 1.5 V VOL and VOH are the typical output voltage levels that occur with the output load.
Fig 9.
The up/down control input (U/D) to output (TC) propagation delay
VI Dn GND VI PE GND tsu(L) VI CP GND VM VM
001aal301
VM tsu th VM VM
VM
VM tsu(H) th = 0 ns
VM th = 0 ns
The shaded areas indicate when the input is permitted to change for predictable output performance. Measurement points are given in Table 8. VM = 1.5 V
Fig 10. Data input (Dn), parallel enable input (PE) and clock input (CP) set-up and hold times
74F269_5
All information provided in this document is subject to legal disclaimers.
(c) NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 05 -- 25 March 2010
11 of 19
NXP Semiconductors
74F269
8-bit bidirectional binary counter
VI CET, CEP GND th(L) tsu(L) VI CP GND VOH Qn VOL COUNT NO CHANGE
001aal302
VM
VM
VM tsu(H) VM
VM th(H) VM
The shaded areas indicate when the input is permitted to change for predictable output performance. Measurement points are given in Table 8. VM = 1.5 V VOL and VOH are the typical output voltage levels that occur with the output load.
Fig 11. Count enable inputs (CEP and CET) and clock input (CP) set-up and hold times
VI U/D GND tsu(L) VI CP GND VOH Qn VOL COUNT DOWN COUNT UP
001aal303
VM
VM th VM
VM
VM th VM
tsu(H)
The shaded areas indicate when the input is permitted to change for predictable output performance. Measurement points are given in Table 8. VM = 1.5 V VOL and VOH are the typical output voltage levels that occur with the output load.
Fig 12. Up/down count control input (U/D) and clock input (CP) set-up and hold times
74F269_5
All information provided in this document is subject to legal disclaimers.
(c) NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 05 -- 25 March 2010
12 of 19
NXP Semiconductors
74F269
8-bit bidirectional binary counter
VI negative pulse 0V
tW 90 % VM 10 % tf tr VM 10 % tr tf 90 % VM 10 % tW
001aai298
90 %
VEXT VCC VI VO DUT
RT CL RL RL
G
VI positive pulse 0V
90 % VM 10 %
mna616
a. Input pulse definition
Test data is given in Table 8. Definitions for test circuit: CL = Load capacitance including jig and probe capacitance. RL = Load resistance.
b. Test circuit
RT = Termination resistance should be equal to output impedance Zo of the pulse generator. VEXT = External voltage for measuring switching times.
Fig 13. Test circuit for measuring switching times Table 8. Input VI 3.0 V fI 1 MHz tW 500 ns tr, tf 2.5 ns Test data Load CL 50 pF RL 500 VEXT tPHL, tPLH open tPZH, tPHZ open tPZL, tPLZ 7.0 V
74F269_5
All information provided in this document is subject to legal disclaimers.
(c) NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 05 -- 25 March 2010
13 of 19
NXP Semiconductors
74F269
8-bit bidirectional binary counter
12. Package outline
SO24: plastic small outline package; 24 leads; body width 7.5 mm SOT137-1
D
E
A X
c y HE vMA
Z 24 13
Q A2 A1 pin 1 index Lp L 1 e bp 12 wM detail X (A 3) A
0
5 scale
10 mm
DIMENSIONS (inch dimensions are derived from the original mm dimensions) UNIT mm inches A max. 2.65 0.1 A1 0.3 0.1 A2 2.45 2.25 A3 0.25 0.01 bp 0.49 0.36 c 0.32 0.23 D (1) 15.6 15.2 0.61 0.60 E (1) 7.6 7.4 0.30 0.29 e 1.27 0.05 HE 10.65 10.00 L 1.4 Lp 1.1 0.4 Q 1.1 1.0 0.043 0.039 v 0.25 0.01 w 0.25 0.01 y 0.1 Z
(1)
o
0.9 0.4
0.012 0.096 0.004 0.089
0.019 0.013 0.014 0.009
0.419 0.043 0.055 0.394 0.016
0.035 0.004 0.016
8 o 0
Note 1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included. OUTLINE VERSION SOT137-1 REFERENCES IEC 075E05 JEDEC MS-013 JEITA EUROPEAN PROJECTION
ISSUE DATE 99-12-27 03-02-19
Fig 14. Package outline SOT137-1 (SO24)
74F269_5 All information provided in this document is subject to legal disclaimers. (c) NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 05 -- 25 March 2010
14 of 19
NXP Semiconductors
74F269
8-bit bidirectional binary counter
SSOP24: plastic shrink small outline package; 24 leads; body width 5.3 mm
SOT340-1
D
E
A X
c
y
HE
vMA
Z
24 13
Q A2
pin 1 index
A1
(A 3) Lp L
A
1
12
detail X wM
e
bp
0
2.5 scale
5 mm
DIMENSIONS (mm are the original dimensions) UNIT mm Note 1. Plastic or metal protrusions of 0.2 mm maximum per side are not included. OUTLINE VERSION SOT340-1 REFERENCES IEC JEDEC MO-150 JEITA EUROPEAN PROJECTION A max. 2 A1 0.21 0.05 A2 1.80 1.65 A3
0.25
bp 0.38 0.25
c 0.20 0.09
D (1) 8.4 8.0
E (1) 5.4 5.2
e 0.65
HE 7.9 7.6
L 1.25
Lp 1.03 0.63
Q 0.9 0.7
v 0.2
w 0.13
y 0.1
Z (1) 0.8 0.4
8 o 0
o
ISSUE DATE 99-12-27 03-02-19
Fig 15. Package outline SOT340-1 (SSOP24)
74F269_5 All information provided in this document is subject to legal disclaimers. (c) NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 05 -- 25 March 2010
15 of 19
NXP Semiconductors
74F269
8-bit bidirectional binary counter
13. Abbreviations
Table 9. Acronym BiCMOS DUT ESD HBM MM Abbreviations Description Bipolar Complementary Metal-Oxide Semiconductor Device Under Test ElectroStatic Discharge Human Body Model Machine Model
14. Revision history
Table 10. 74F269_5 74F269_4 Modifications: 74F269_3 Modifications: Revision history Release date 20100325 20100308 Data sheet status Product data sheet Product data sheet Product data sheet Change notice Supersedes 74F269_4 74F269_3 74F269_2 Document ID
* * * *
Table 6 "Static characteristics": Conditions typical values corrected. The format of this data sheet has been redesigned to comply with the new identity guidelines of NXP Semiconductors. Legal texts have been adapted to the new company name where appropriate. DIP 24 (SOT222-1) package removed from Section 3 "Ordering information" and Section 12 "Package outline" Product specification 74F269_1
20100126
74F269_2
19960105
74F269_5
All information provided in this document is subject to legal disclaimers.
(c) NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 05 -- 25 March 2010
16 of 19
NXP Semiconductors
74F269
8-bit bidirectional binary counter
15. Legal information
15.1 Data sheet status
Document status[1][2] Objective [short] data sheet Preliminary [short] data sheet Product [short] data sheet
[1] [2] [3]
Product status[3] Development Qualification Production
Definition This document contains data from the objective specification for product development. This document contains data from the preliminary specification. This document contains the product specification.
Please consult the most recently issued document before initiating or completing a design. The term `short data sheet' is explained in section "Definitions". The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com.
15.2 Definitions
Draft -- The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Product specification -- The information and data provided in a Product data sheet shall define the specification of the product as agreed between NXP Semiconductors and its customer, unless NXP Semiconductors and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the NXP Semiconductors product is deemed to offer functions and qualities beyond those described in the Product data sheet.
liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. Applications -- Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. NXP Semiconductors does not accept any liability related to any default, damage, costs or problem which is based on a weakness or default in the customer application/use or the application/use of customer's third party customer(s) (hereinafter both referred to as "Application"). It is customer's sole responsibility to check whether the NXP Semiconductors product is suitable and fit for the Application planned. Customer has to do all necessary testing for the Application in order to avoid a default of the Application and the product. NXP Semiconductors does not accept any liability in this respect. Limiting values -- Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale -- NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. NXP Semiconductors hereby expressly objects to applying the customer's general terms and conditions with regard to the purchase of NXP Semiconductors products by customer. No offer to sell or license -- Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control -- This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from national authorities.
15.3 Disclaimers
Limited warranty and liability -- Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. In no event shall NXP Semiconductors be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, NXP Semiconductors' aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of NXP Semiconductors. Right to make changes -- NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use in automotive applications -- This NXP Semiconductors product has been qualified for use in automotive applications. The product is not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no
15.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners.
74F269_5
All information provided in this document is subject to legal disclaimers.
(c) NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 05 -- 25 March 2010
17 of 19
NXP Semiconductors
74F269
8-bit bidirectional binary counter
16. Contact information
For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com
74F269_5
All information provided in this document is subject to legal disclaimers.
(c) NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 05 -- 25 March 2010
18 of 19
NXP Semiconductors
74F269
8-bit bidirectional binary counter
17. Contents
1 2 3 4 5 5.1 5.2 6 6.1 7 8 9 10 11 12 13 14 15 15.1 15.2 15.3 15.4 16 17 General description . . . . . . . . . . . . . . . . . . . . . . 1 Features and benefits . . . . . . . . . . . . . . . . . . . . 1 Ordering information . . . . . . . . . . . . . . . . . . . . . 1 Functional diagram . . . . . . . . . . . . . . . . . . . . . . 2 Pinning information . . . . . . . . . . . . . . . . . . . . . . 5 Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 5 Functional description . . . . . . . . . . . . . . . . . . . 6 Function table . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 8 Recommended operating conditions. . . . . . . . 8 Static characteristics. . . . . . . . . . . . . . . . . . . . . 9 Dynamic characteristics . . . . . . . . . . . . . . . . . . 9 Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Package outline . . . . . . . . . . . . . . . . . . . . . . . . 14 Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 16 Legal information. . . . . . . . . . . . . . . . . . . . . . . 17 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 17 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Contact information. . . . . . . . . . . . . . . . . . . . . 18 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Please be aware that important notices concerning this document and the product(s) described herein, have been included in section `Legal information'.
(c) NXP B.V. 2010.
All rights reserved.
For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 25 March 2010 Document identifier: 74F269_5

▲Up To Search▲

Price & Availability of 74F269

	To Download 74F269 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .